Six months after New York passed its landmark bill legalizing marijuana for adult use and creating a regulatory framework for the cannabis industry overall, the state is violating the law’s deadline for home cannabis cultivation rules.
The Marijuana Regulation and Taxation Act allows limited home cultivation of medical cannabis. But it also specifies that patients will not enjoy that right until after the Office of Cannabis Management issues regulations governing it, which it was obligated to do “no later than six months after the effective date” of the law. But after a series of delays, staffing of that office is still underway.
That means lawmakers’ intention for the law to allow medical marijuana card holders to begin growing plants this week is on hold indefinitely.
The delay is the latest in a series of stumbles in the medical cannabis program, and they are occurring in spite of the explicit intent of legislators who drafted and championed the new law.
In the months following the law’s passage, patients and doctors also complained that key updates to the program which legislators insisted were meant to apply right away had yet to take effect, including increasing patients’ supply limits to 60 days, permitting physicians to have discretion on the reasons they certify for patients’ cannabis use, and allowing the sale of whole flower.
“I’ve had quite a few people who I’ve turned away because they wanted it specifically for insomnia, that’s the big need, and it’s not a qualifying condition” at the moment, he said. “So all of those people are headed off to Massachusetts to buy something.”
Oldendorf said this delay has pushed some doctors to search for additional relevant ailments that might tick a box on the state’s outdated online form, in order to get around the restrictive list of conditions a provider must select from.
Whether it’s your first time building out a home grow or you just haven’t bought new gear in a while, budgeting is essential.
If you don’t want any of the advice or details and you just want to know if it’s cheap or expensive to build out your own grow, the answer is yes.
In other words, you can do it the cheap way or you can do it the right way. That’s not to say setting up a grow as cheap as possible can’t work out, but in the end you might end up spending more with all the problems cheap set ups can cause.
Budgeting out your home grow space is one of the only aspects of home growing that you can potentially save some money on. This is because if you have a nice walk-in closet, or storage space you aren’t using, you have a grow space.
For others without the extra space, you either have to build your own grow space like a greenhouse in the backyard, or you can buy a grow tent. Grow tents make it super easy to get going because they come with holes to pipe in ventilation, reflective walls to help with light, and other features.
If you just have a closet space, you can just as easily line the walls with some plastic and pick up some reflective material to help with light penetration. The size of your grow space will also determine how many pots you’ll be able to fit and in turn, how many plants you’ll be able to grow.
When it comes to pricing out your grow space, you can spend close to nothing, or you can spend a lot. But on the high end, expect to pay a couple hundred for a grow tent or the supplies to build a small greenhouse.
Pots and Medium
You can save a lot of money on pots by using traditional plastic pots. They won’t cost more than $10 for half a dozen depending on the size you want, but plastic has its restrictions.
A lot of growers instead choose to use fabric pots because they provide more aeration and some brands have handles attached for easy transport. If you decide to set up a flood and drain hydroponic table system (if you have the space of course), fabric pots absorb water much better than the few holes in plastic pots allow.
Cost-wise, fabric pots aren’t too much more expensive than plastic pots, only a dollar or so more depending on size. As for mediums, the options are much more varied.
Potting soil is always a good option for your standard grow, especially just starting out. It’s affordable and cost-effective, though it limits how often you can feed, and depending on the soil blend, you may have to adjust pH or other nutrients to account for variations in nutritional content that might already be in the soil.
For this reason, you should consider a soilless medium. Coco fiber and rockwool are two of the most popular soilless mediums currently, mainly because of their inert characteristics that allow growers to feed more often resulting in bigger plants. Also, soilless mediums are typically the cheaper option.
A bag of basic potting soil will typically run you about $15, with higher end blends costing up to $20 or more. Factor in your pot sizes and you can determine exactly how many bags you need to fill all your pots and how much it will cost.
It might seem like the easy choice to go online, do a google search for some grow lights and pick one of the cheaper options. You’ll save a couple bucks, but the product you receive might end up a little different from the product that was advertised.
A lot of low end lights draw you in with their price point, but once your bulb or ballast stops working after a month, you’re stuck either buying from the same crappy brand, or buying new lights all together. You’ll thank yourself later if you dish out some extra dough for quality lights that will last a long time.
Before picking your lights, you need to calculate your space’s square footage to determine what kind of light would best fit the space. Higher wattage lights will cover a much larger area, and using them in a smaller space won’t help your plants. But you also don’t want to get a light that is too weak and doesn’t provide enough light for all of your plants.
If you decide to go the cheap route, you can get T5 bulbs for vegging your plants, and a 315W for flower without breaking the bank. But for the most effective growth, 1000W Double Ended lights will give the most bang for your buck, with the standard brands coming in around $400-500. Keep in mind if you don’t have the right size space or a means to keep it cool, 1000W bulbs can really heat up your room and damage your plants.
For this reason it’s always wise to invest in some solid ventilation.
When it comes to ventilation there are two essentials every home grow should have, no matter the size of your grow space; a carbon filter and a fan. These two items should never be overlooked when you’re growing at home.
Your plants might like a warm environment, but they don’t like a stagnate environment with stale air. With your lights producing so much heat, you need to move the air around your grow space to prevent overheating. Just having one rotating fan can make a huge difference in keeping your plants and your room cool.
Even if you’re growing the best smelling flowers in the neighborhood, nobody wants their whole house reeking. A carbon filter scrubs the air in your room by pulling it in and cleansing it before releasing it. If you have a closed system where you don’t need to pump the air out, you can recirculate it into your room with a carbon filter.
You can find a few different, quality, small carbon filter options for under $200, with prices rising steadily up into the $300s for larger filters. Fans are also pretty cheap, with 6″ clip-on fans for $20 or less, and higher end large standing fans for $70.
One of the most common mistakes first time growers will make is using tap water to water their plants or mix with nutrients without proper precaution. Tap water contains chloramines, and these chemicals interfere with biological components of nutrients rendering them useless.
If you’re trying to save money and hand water because you only have six plants, that’s just fine. You can even avoid buying a water filter to deal with the chloramines by letting your water sit for 24 hours before mixing with your nutrients. But let’s be real, your plants need to be fed regularly and unless you get on a schedule of pouring water 24 hours in advance in a way that you have a steady supply of usable water, a water filter is the most efficient option.
If money isn’t an issue, you can optimize your water and feedings with irrigation. On the cheap end the equipment will run you $500 or more, with the most expensive component being the water pump.
If you’ve made it this far, you should know well by now that the costs of setting up your home grow can vary greatly. But we can come up with some rough numbers for getting started from scratch.
If you’re really pinching pennies and just want to get going, you can buy the cheap lights, use whatever grow space you got with plastic pots and hand water, and you’ll still be looking at around $300 when all is said in done. For the average grower with a little more change to spare, $500 can really boost what you can get and help you get started on the right foot.
Of course there’s really no limit to how much you can spend to get the best gear for your home grow. If you’re really serious of growing and want to transition into a professional environment eventually, it’s smart to grow with good gear so you can advance your craft. Just remember that it won’t come cheap!
Roll it up, ya’ll! Tony Don’t Smoke OG Ep. 4 brings Chip and Tony together once more with their secret guest I225. The gang smokes on some Cookies in this one as they talk grow management and how to organize a cannabis business.
From constantly inspecting your environment to getting down into the dirt, managing a grow is not easy by any stretch of the imagination. Sure, growing a couple dozen plants with a couple hands on deck is manageable, but once you start growing your scale, it only gets more difficult.
Chip, Tony and I225 have decades of grow management experience between them, and share their knowledge and tips to boost productivity and reduce oversight. But it ain’t all about the technical stuff!
Cookies is one of the most popular elite strains in the cannabis industry today, with new crosses coming out left and right. The gang talks strain popularity, and what makes a strain so popular in the first place. Plus, we get to hear where the original Lambs Bread strain came from, and how Tony managed to get an original cut back in the day.
Listen to the full episode of Tony Don’t Smoke OG right now here on The Real Dirt, or listen on your favorite podcast app!
If you’re looking to start breeding, or just want to grow cannabis the traditional way, it’s important to know how cannabis seeds work.
The most important thing to know about traditional cannabis seeds is that they are dioecious, meaning that cannabis produces male and female seeds. Typically, this results in about a 1:1 ratio of male and female seeds that will be produced through breeding. In other words, when you buy a back of 10 seeds, there’s a good chance that half of them will be male. The biggest issue with traditional cannabis seeds is that you can’t actually tell the sex of the seed until it’s already planted. Not only that, cannabis plants typically won’t reveal their sex until the flower cycle starts, meaning you can be caring for male plants for months before you find out they’re male.
Preparing cannabis seeds
Due to the unpredictable nature of cannabis seeds, it’s important to be prepared. Since it’s likely half your seeds will be male, a lot of growers will buy double the amount of seeds they need, so when they inevitably have to throw out the males, they will still have the amount of females they originally wanted.
Remember, if you don’t buy extra seeds, after a couple of months, a once promising yield can be slashed in half by getting rid of the males. This is why you need to decide whether or not you want to produce your own seeds. If you decide to leave the males with the females, they will pollinate and produce more seeds.
Not for everybody
With the risk of growing male plants and reducing yields, growing from traditional cannabis seeds is not for everybody. Newer growers may try out feminized seeds or auto-flowering seeds. These kinds of seeds both guarantee that your plants will be female, and auto-flowering seeds will even grow on their own, regardless of their light cycle.
However, a new grower can also greatly benefit from the lessons learned by growing traditionally. If you’re just growing for personal use and have a few plants, you won’t lose all that much if you plan ahead, get 6 seeds, and expect 3 of them to be male. Plus, should you end up growing a strain you really like, you can keep the male plants separate until you’re ready, then pollinate the females to create more seeds.
It’s comes down to preference
Growing cannabis from traditional male/female seeds may be more difficult, but it can be just as rewarding. The ability to breed your plants, and pick out the ones you eventually don’t want gives the grower a certain amount of control over their plants. However for some, the risk may outweigh the cost, as having to buy double the seeds to get the desired amount of females can add up.
Hear what Caleb from CSI Humboldt has to say about growing from traditional seeds on the new episode of The Real Dirt with Chip Baker. Listen to the episode on iTunes, Spotify or wherever you get your podcasts!